2 - IMG_5AD14A91-35F4-E901-D513-D48AF653A535
2 - IMG_5AD14A91-35F4-E901-D513-D48AF653A535
Fascia is dangling.
3 - IMG_5E25CD0D-9FFE-3950-8136-D4F33F0FBB8A
3 - IMG_5E25CD0D-9FFE-3950-8136-D4F33F0FBB8A
Flashing has risen on the dormer.
4 - IMG_B896B95E-B98C-188C-DE11-52EBF61BE48D
4 - IMG_B896B95E-B98C-188C-DE11-52EBF61BE48D
Fastening the flashing.
5 - IMG_EE1BBCE8-F6B1-B161-B35C-2AFFA9DFCBC7
5 - IMG_EE1BBCE8-F6B1-B161-B35C-2AFFA9DFCBC7
Fastened down the flashing.
6 - IMG_E5759341-9A02-C9AE-8684-67A63997B94A
6 - IMG_E5759341-9A02-C9AE-8684-67A63997B94A
Secured the fascia back in place.
7 - IMG_0A79DBF7-9143-2C84-AB94-7E6DCFF7CEA8
7 - IMG_0A79DBF7-9143-2C84-AB94-7E6DCFF7CEA8
Cross vented.
8 - IMG_5AEA6FCB-8AFB-6DEE-0C7D-5DB0CFFFF41B
8 - IMG_5AEA6FCB-8AFB-6DEE-0C7D-5DB0CFFFF41B
Open valley should be closed or W-shaped.
9 - IMG_01D7C761-B392-CB20-9A05-93F8BDD56595
9 - IMG_01D7C761-B392-CB20-9A05-93F8BDD56595
Surface cracks in the membrane.
34 - IMG_A56A7752-B566-E64F-C907-6942BA2CBEF2
34 - IMG_A56A7752-B566-E64F-C907-6942BA2CBEF2
Large blisters and surface cracking in membrane.
35 - IMG_A49E8478-8BA3-7551-838D-20A8819BDAB2
35 - IMG_A49E8478-8BA3-7551-838D-20A8819BDAB2
Large blisters along edge. Water penetrating through.
10 - IMG_D0894C8A-1AC7-2ED6-E596-0675F324B22A
10 - IMG_D0894C8A-1AC7-2ED6-E596-0675F324B22A
Lower roof is in fair condition.
11 - IMG_D5599964-6B13-77CA-045C-73E53A481FE7
11 - IMG_D5599964-6B13-77CA-045C-73E53A481FE7
Loose trough spikes.
12 - IMG_5387D427-BFAD-4DF2-65AC-2E94621EAA61
12 - IMG_5387D427-BFAD-4DF2-65AC-2E94621EAA61
Secured trough spikes. The trough has a leaf guard in it and it is clean.
13 - IMG_3C5A3125-EE4A-F540-F079-636EA544B3D5
13 - IMG_3C5A3125-EE4A-F540-F079-636EA544B3D5
Shared chimney flashing is sealed well and is in good shape.
14 - IMG_9B501762-9F60-DFC7-3AA8-9647159EEE2D
14 - IMG_9B501762-9F60-DFC7-3AA8-9647159EEE2D
Secured all vents with mechanical fasteners.
15 - IMG_D3EE9C1B-A62C-F084-DBB5-39DD77EFDDF8
15 - IMG_D3EE9C1B-A62C-F084-DBB5-39DD77EFDDF8
Shingles are in good shape.
16 - IMG_0118F3B1-CE45-9B07-2AF9-BCCFB0C9B659
16 - IMG_0118F3B1-CE45-9B07-2AF9-BCCFB0C9B659
Improper starters used, no drip edge and 3 feet of ice and water shield only.
22 - IMG_C0457AEB-D447-3B70-278B-F46F52460615
22 - IMG_C0457AEB-D447-3B70-278B-F46F52460615
Plaster ceiling. No vapour barrier. Insulation very low. R5
23 - IMG_427620E3-61C4-8561-0D49-CB1016EF723E
23 - IMG_427620E3-61C4-8561-0D49-CB1016EF723E
Attic needs to have proper insulation with spray foam.
24 - IMG_686CD20F-B182-BF4E-FFCD-AF42DBF1C690
24 - IMG_686CD20F-B182-BF4E-FFCD-AF42DBF1C690
Roof boards are ok.
25 - IMG_0F148ED0-764C-7AC4-C361-6FC6953035EC
25 - IMG_0F148ED0-764C-7AC4-C361-6FC6953035EC
Old vent removed.
26 - IMG_677EB193-2501-DB75-C123-8324721463C3
26 - IMG_677EB193-2501-DB75-C123-8324721463C3
Wood being installed over hole.
27 - IMG_3EDFD654-8C65-374C-273C-3752C09AC3E7
27 - IMG_3EDFD654-8C65-374C-273C-3752C09AC3E7
Old hole being covered and sealed with roof cement and new shingles.
28 - IMG_87731CDD-843A-2A2C-9CDF-C3FC834C4889
28 - IMG_87731CDD-843A-2A2C-9CDF-C3FC834C4889
New vent hole opening for new vent at the back of the slope.
29 - IMG_803A04CB-F120-4207-64EB-D03E9C75C67C
29 - IMG_803A04CB-F120-4207-64EB-D03E9C75C67C
New vent installed and sealed.
30 - IMG_A40D4CF5-B9D0-EB50-A330-BD7248897369
30 - IMG_A40D4CF5-B9D0-EB50-A330-BD7248897369
Vents sealed with roof cement.
31 - IMG_4488DF96-C8B9-62CC-12FA-4FA927090866
31 - IMG_4488DF96-C8B9-62CC-12FA-4FA927090866
A second vent was added to the front dormer.
32 - IMG_17A19006-FE57-5DA2-EDA9-A51D18EA6E72
32 - IMG_17A19006-FE57-5DA2-EDA9-A51D18EA6E72
Second vent installed and sealed.
33 - IMG_FDB35760-385D-DEDE-360E-229B5CA24650
33 - IMG_FDB35760-385D-DEDE-360E-229B5CA24650

The Challenge

The Client approached Mr. Roof Repair requesting a full roof tune-up.

The Solution

Mr. Roof Repair’s Roofing Specialist (RS) Team resecured the dangling fascia, resecured the section of flashing that had risen, and sealed all of the vents for a watertight secure hold. They returned at a later date to correct the ventilation system which was cross venting.

Related Projects

See All Projects